Key For Ultrabait Vr Rat Bait Station

• Our strongest and most secure lockable bait station available in green or black
• Free printing on orders of 12 or more call for details
• Amazing build quality, strong pressed steel construction can withstand vehicle impacts
• Ideal for use in commercial & industrial environments or where there is a risk of vandalism
• Bait stations lock with a common key, supplied seperately
• Ground anchors and wall plates also sold seperately to prevent unwanted removal
• Accepts Victor, Romax and Trapper T-Rex snap traps

Dimensions: 300mm X 200mm X 120mm

• Deep-drawn powder coated and zinc plated steel casing
• Shock and tamper resistant lock with high tensile spring steel lock blade
• Easy access top key entry
• No box can be opened and serviced faster than an Ultrabait
• No need to touch anything but the key to inspect
• One key fits all
• Polypropylene bait tray is full height to lid to keep bait in the tray
• Takes loose or block bait
• Fitted with 2 bait spikes inserted vertically to secure bait blocks
• Hinged casing (no fiddly lift off panels)
• Raised warm feel plastic trays are welcoming to rodents
• Free printing on orders of 12 or more

See fixing instructions download for detailed information.

Place one bait station every 5 - 10 linear metres. Ultrabait VR is a heavy-duty bait station for use in environments where the station may be subject to impacts, attempted theft or vandalism.

For outdoor use, place an ultrabiat VR unit where there are signs of rodent activity i.e. droppings, holes etc.

Ideally place along a known "rat runs" such as against walls or fence lines or hedgerows to increase efficacy.

If placing an ultrabiat VR unit on open ground use optional ground anchor to secure the ultrabiat VR unit in place by removing the moulded inner tray, drive the anchor into the ground, having removed securing bolt first, to prevent thread damage, place a block of wood between the anchor and the hammer. Then place open bait station over anchor such that the hole in the base lines up with the threaded hole in the top of the anchor. Finally secure station to anchor using the bolt provided and replace moulded tray.

If you are placing an ultrabiat VR unit on a masonry or metalled roadway surface then remove moulded inner tray and fix to roadway using plugs and screws through the pre-manufactured holes in the base of the chassis, then replace moulded interior.

If placing against a wall or fence use an optional wall plate to secure the ultrabiat VR unit to the structure. There are two types of wall plate. Light duty to prevent accidental spillage or upset and heavy duty if there is a chance of theft or vandalism.

The ultrabiat VR unit comes with two secure internal baiting rods that will accept all types of all weather bait blocks and a moulded bait tray for using grain or sachet bait. Once baited in accordance with the bait manufacturer's instructions lock the bait station and monitor at 1-week intervals, topping-up if required.

Leave the ultrabiat VR unit fully baited in place for at least 30 days after the last sign of "bait take" was seen to ensure infestation has been eradicated. Always wear gloves when handling rodenticide or removing dead rodents.