Important information: Kit sizes are displayed as Depth x Width.
This ClassicBond EPDM Flat Roof Kit is designed for extensions where one long edge has a gutter and the opposite long edge adjoins a house wall with wall flashing.
Easy to install and built for long-lasting performance, this flat rubber roof kit provides everything you need to create a durable EPDM roof for extensions, garages and porches where the roof meets an adjoining wall.
The 1.2mm ClassicBond EPDM rubber membrane has an expected lifespan of up to 50 years and offers excellent resistance to UV rays, ozone and infrared radiation. This helps prevent cracking, blistering and peeling, providing a reliable and low-maintenance flat roofing solution.
For the best results when installing your ClassicBond EPDM flat roof kit, it is important to prepare the roof deck correctly.
We recommend following these guidelines:
Use OSB3 boards: Always use moisture-resistant OSB3 roofing boards rather than standard OSB2 boards.
Board thickness: The ClassicBond installation guidelines specify an 18mm OSB3 or plywood roof deck.
Board type: Use 18mm OSB3 tongue-and-groove roofing boards, or square-edge OSB3 boards with all joints properly supported.
Clean and dry surface: Ensure all boards are clean, dry and structurally sound before applying adhesive.
Avoid sealed boards: Do not use wax-coated or sealed boards, as these can prevent the adhesive from bonding correctly.
Expansion gaps: Allow approximately 2–3mm expansion gaps between boards to accommodate natural movement.
When installing the membrane, use ClassicBond water-based adhesive across the main roof deck and contact adhesive around the roof perimeter and upstands. Always follow the manufacturer's installation instructions.
Each ClassicBond EPDM Flat Roof Kit contains the following:
1 x 1.2mm thick ClassicBond EPDM rubber membrane (size as per the roof kit selected).
Water-based adhesive for bonding the membrane to the roof deck.
Contact adhesive for bonding the membrane around the roof perimeter.
Sure Edge Gutter trim for the front edge.
Sure Edge Kerb trims for both side edges.
Sure Edge Corner trims for both front corners.
Wall trim to provide flashing against the adjoining house wall.
External corner patches and primer for both rear corners where the roof meets the house wall.
DIY installation tools, including rollers, scissors and a paintbrush.
All necessary pins and clips for the supplied trims.
Depending on the size of kit ordered, your EPDM membrane may contain manufacturing seams or joins. However, it will always be supplied as one complete piece.
These seams are machine-processed to provide a strong, durable and long-lasting bond. They are often among the strongest areas of the membrane, so there is no need to make any joins on-site during installation.
The membrane supplied will be the same size as the kit selected. Your actual roof dimensions must therefore be smaller than the membrane dimensions to allow for the necessary overlaps around the edges.
For example: A 6m x 3m roof kit will accommodate a roof measuring no more than 5.7m x 2.7m.
Always check your roof measurements carefully before ordering to ensure you select the correct kit size.
ClassicBond FAQs
What is The Life Expectancy of EPDM Rubber Roofs?
EPDM Rubber roofs have a 50 year life expectancy.
Is There A Right Side Up When Installing ClassicBond EPDM Membranes?
Classicbond EPDM membranes are identical on both sides so there is no right or wrong side when installing this product. It is important to bear in mind that sometimes there may be a small amount of manufacturer writing printed on one side of the rubber membrane; if this is the case we recommend installing this side down onto the deck so that the clear side is only visible.
Will my membrane be in one piece? And will it have joins?
More often than not, your EPDM membrane will be in one piece but have manufacturing joins at certain intervals. These are unavoidable but necessary to provide it in one piece, meaning no on-site joins are required.
The joins are done with a process called vulcanisation, which is done with heat, pressure and seam tape. This provides a good join that is strong as it's effectively two layers of EPDM in one place.
Does It Have To Be Dry For EPDM Roofing To Be Laid?
EPDM membranes require the substrate to be dry prior to installation so that the adhesive & primers can effectively bond the rubber to the roof deck. EPDM products will not adhere to wet or damp surfaces. It is important to bear in mind that trapped moisture within the deck may vaporize and negatively affect the performance of the membrane.
Can EPDM Withstand Hard Impacts From Outside Conditions?
Along with a life expectancy of 50 years and beyond, EPDM rubber can stand up to quite some force from outside elements.
Why Have Bubbles Appeared On The Edge Of My Newly Laid EPDM Rubber Roof?
Occasionally, bubbles and blisters can appear around the perimeter of the EPDM rubber roof just after it's been fitted. There are a few reasons why this can happen, the Contact Adhesive could have been applied too thick, or if it has not been allowed enough time to properly tack-off.
Is it safe to walk on an EPDM rubber roof?
EPDM rubber membrane is an extremely tough material that will easily handle light foot traffic, such as when it's being installed. However, it is important to make sure no sharp objects are introduced onto the membrane from boots or tools.
Which Thickness of rubber roofing membrane should I buy?
Both the 1.2mm and 1.5mm EPDM rubber membranes are perfect for residential and commercial projects alike. 1.2mm membrane is a trusted product by our roofing customers and our most popular item for a good reason. 1.5mm membrane tends to lay a little easier due to the thickness and can also provide a smoother looking finished flat roof. We would recommend 1.5mm if there is going to be anything overlayed on top of the rubber like decking, screed and tiles or even a green roof.
Can EPDM Sheets Be Joined?
Yes. This is useful for roofs larger than the sheet size, or if it's easier to install in smaller sections.
Are The EPDM Membranes Guaranteed?
A 20 year guarantee is available to all certified installers who have attended a training course.
Does EPDM rubber have a factory join?
Yes it has a galvanised factory join, which has no detriment to the integrity of the membrane or join.
Can I Install Tiles Or Slabs Onto An EPDM Rubber Roof?
Yes, slabs or tiles can be installed on top of an EPDM flat roof.
Is The ClassicBond Membrane Available In Different Colours?
No, the membrane is only available in slate grey.
Is ClassicBond EPDM BBA Certified?
Yes, ClassicBond membrane holds the BBA certificate, No. 11/4853 (issued to Flex-R Ltd). It also holds fire ratings for each of the thicknesses available.
Do I need any special tools for my EPDM roof?
A 9" roller set, mini roller and brush for applying the adhesive, and scissors or a blade to trim any excess rubber. A seam roller and a penny roller are also useful.
Can I install a different substrate like cement screed or a green roof on top of a EPDM rubber membrane?
Yes, this is an option with the 1.5mm EPDM rubber. However, it's recommended to use something like a Geotextile fleece laid on top, rather than placing anything directly on the rubber.
How much overhang do I need on the membrane?
As a general rule, around 300mm on the length and width, which will give you 150mm tolerance on all sides.
What temperatures can EPDM rubber withstand?
EPDM rubber can withstand temperature ranges from -40ºC to +120ºC.
How heavy is the membrane?
To work out the weight of rubber, multiply the total square metre by 1.5 for a 1.2mm membrane and multiply by 2.0 for 1.5mm membrane.
Is there a minimum pitch required to install EPDM rubber?
The minimum pitch is 5 degrees and the maximum is 15 degrees. If the pitch is higher than 15 degrees, the EPDM will need to be laid with contact adhesive only.
What surfaces can EPDM rubber be bonded to?
Please note: Upstands and perimeter are always bonded with contact bonding adhesive or spray contact.
What kind of temperature can EPDM rubber be installed in?
Anything above 4 degrees will be OK.
My roof has a small hole which is causing a leak, how easy is it to repair this?
One of the benefits of EPDM is that it can be repaired very quickly and easily. A small hole or rip can be sealed with a patch repair kit.
Can EPDM rubber be painted?
Yes, but using acrylic based paint only.
ClassicBond Pro FAQs
What adhesive do I use when bonding Classicbond Pro EPDM?
For OSB3 / Plywood boards, then water based glue only. For any other substrate you can use PU deck adhesive.
Is Classicbond Pro Fire rated and BBA Certified?
Yes, ClassicBond Pro EPDM holds the BBA certificate, No. 11/4853 (issued to Flex-R Ltd). It also holds fire ratings Broof T4.
What are the benefits of Classicbond Pro over regular Classicbond?
Because it's a fleece reinforced membrane, this feature allows it to be bonded directly to a felt substrate, which you can't do with regular Classicbond EPDM rubber. It's Ideal for a repair, renewal or a new build.
What's is the life expectancy of Classicbond Pro?
It has a life expectancy of 50 years.
Does Classicbond Pro possess thermal properties?
The fleece is there to allow the membrane to be laid directly onto different substrates like felt, not for any thermal properties.
Does Classicbond Pro possess U Value?
The U Value of the Classicbond Pro is not something that is tested because it doesn't serve that purpose.
How do you join other parts of the Classicbond Pro where this no 3 inch tape applied?
You will need to use 6 inch tape to run along the whole ends where there isn't 3 inch tape pre-installed. You will also require 9 inch tape corner patches to seal any cross junctions / butt ends.
What you need to know
Delivery charges
Delivery access
Date and time of delivery
Failed deliveries are chargeable
Damages & missing items
Do not install purchased items if you have a query with the product (e.g. if you need to query damage that occurred during transit).
Delivery
How much does delivery cost?
Delivery charges will vary and will depend on the manufacturer, weight, size and delivery location. The cost is automatically calculated when you add items to the shopping basket.
How long will I wait for my delivery?
The estimated delivery times are shown on each product page, we will email you each step of the way to keep you informed. The majority of products can be delivered within 3-5 working days.We will advise you if the delivery period is different from than stated on our website.
What if my delivery doesn't turn up on time?
Please contact our sales office on 01858 455055 or email sales@roofgiant.com and we will advise on the status of your order.
Do you offer free delivery if I spend a substantial amount?
Not as standard, we show the delivery charges separate once you go to the checkout so it is clear what you are paying for the products and delivery costs. If you are ordering larger quantities please contact out sales team who will be able to confirm if this is possible.
Do you deliver on weekends?
Not as standard, our deliveries are made Monday to Friday. If you do need an urgent Saturday delivery please contact out sales team on 01858 455055 during office hours who will be able to confirm. This will incur a premium charge if possible.
Do you deliver to Northern Ireland/Guernsey/The Scottish Highlands/Isle of Wight?
We cannot deliver any goods to Northern Ireland due to supplier restrictions.
Some suppliers/couriers will deliver to the other areas listed above, but not all - please contact our sales team for confirmation. If we are able to deliver the product you require, additional transport costs will apply. These additional costs are based on the manufacturer, distributor or courier providing the shipping on our behalf.
Do you deliver to Republic of Ireland, Europe and Rest of World?
No, we cannot deliver outside of Great Britain.
What if my delivery doesn't turn up on time?
Please contact our sales office on 01858 455055 or email sales@roofgiant.com and we will advise on the status of your order.
Returns Policy
Important: Please do not return goods without first contacting our Sales Office and receiving return instructions.
📞 01858 455055 | ✉️ sales@roofgiant.com | 💬 Live chat
Please take photographs of the goods and packaging before returning. These may be required to support a return or courier claim.
Your Right to Cancel
Refunds
Exclusions & Brand Policies
👉 For full details, including supplier-specific terms, please see our Returns & Refund Policy.