Both new and used EPDM membrane can be cleaned using the ClassicBond Weathered Membrane Cleaner.
It aids in removing dirt and other debris from the membranes' surface and helps to leave a surface that is suited for the subsequent application of primer. For preparing an adhesive splice, Weathered Membrane Cleaner should be used. The ClassicBond and ClassicBond Pro membranes are compatible with this product.
ClassicBond FAQs
What is The Life Expectancy of EPDM Rubber Roofs?
EPDM Rubber roofs have a 50 year life expectancy.
Is There A Right Side Up When Installing ClassicBond EPDM Membranes?
Classicbond EPDM membranes are identical on both sides so there is no right or wrong side when installing this product. It is important to bear in mind that sometimes there may be a small amount of manufacturer writing printed on one side of the rubber membrane; if this is the case we recommend installing this side down onto the deck so that the clear side is only visible.
Will my membrane be in one piece? And will it have joins?
More often than not, your EPDM membrane will be in one piece but have manufacturing joins at certain intervals. These are unavoidable but necessary to provide it in one piece, meaning no on-site joins are required.
The joins are done with a process called vulcanisation, which is done with heat, pressure and seam tape. This provides a good join that is strong as it's effectively two layers of EPDM in one place.
Does It Have To Be Dry For EPDM Roofing To Be Laid?
EPDM membranes require the substrate to be dry prior to installation so that the adhesive & primers can effectively bond the rubber to the roof deck. EPDM products will not adhere to wet or damp surfaces. It is important to bear in mind that trapped moisture within the deck may vaporize and negatively affect the performance of the membrane.
Can EPDM Withstand Hard Impacts From Outside Conditions?
Along with a life expectancy of 50 years and beyond, EPDM rubber can stand up to quite some force from outside elements.
Why Have Bubbles Appeared On The Edge Of My Newly Laid EPDM Rubber Roof?
Occasionally, bubbles and blisters can appear around the perimeter of the EPDM rubber roof just after it's been fitted. There are a few reasons why this can happen, the Contact Adhesive could have been applied too thick, or if it has not been allowed enough time to properly tack-off.
Is it safe to walk on an EPDM rubber roof?
EPDM rubber membrane is an extremely tough material that will easily handle light foot traffic, such as when it's being installed. However, it is important to make sure no sharp objects are introduced onto the membrane from boots or tools.
Which Thickness of rubber roofing membrane should I buy?
Both the 1.2mm and 1.5mm EPDM rubber membranes are perfect for residential and commercial projects alike. 1.2mm membrane is a trusted product by our roofing customers and our most popular item for a good reason. 1.5mm membrane tends to lay a little easier due to the thickness and can also provide a smoother looking finished flat roof. We would recommend 1.5mm if there is going to be anything overlayed on top of the rubber like decking, screed and tiles or even a green roof.
Can EPDM Sheets Be Joined?
Yes. This is useful for roofs larger than the sheet size, or if it's easier to install in smaller sections.
Are The EPDM Membranes Guaranteed?
A 20 year guarantee is available to all certified installers who have attended a training course.
Does EPDM rubber have a factory join?
Yes it has a galvanised factory join, which has no detriment to the integrity of the membrane or join.
Can I Install Tiles Or Slabs Onto An EPDM Rubber Roof?
Yes, slabs or tiles can be installed on top of an EPDM flat roof.
Is The ClassicBond Membrane Available In Different Colours?
No, the membrane is only available in slate grey.
Is ClassicBond EPDM BBA Certified?
Yes, ClassicBond membrane holds the BBA certificate, No. 11/4853 (issued to Flex-R Ltd). It also holds fire ratings for each of the thicknesses available.
Do I need any special tools for my EPDM roof?
A 9" roller set, mini roller and brush for applying the adhesive, and scissors or a blade to trim any excess rubber. A seam roller and a penny roller are also useful.
Can I install a different substrate like cement screed or a green roof on top of a EPDM rubber membrane?
Yes, this is an option with the 1.5mm EPDM rubber. However, it's recommended to use something like a Geotextile fleece laid on top, rather than placing anything directly on the rubber.
How much overhang do I need on the membrane?
As a general rule, around 300mm on the length and width, which will give you 150mm tolerance on all sides.
What temperatures can EPDM rubber withstand?
EPDM rubber can withstand temperature ranges from -40ºC to +120ºC.
How heavy is the membrane?
To work out the weight of rubber, multiply the total square metre by 1.5 for a 1.2mm membrane and multiply by 2.0 for 1.5mm membrane.
Is there a minimum pitch required to install EPDM rubber?
The minimum pitch is 5 degrees and the maximum is 15 degrees. If the pitch is higher than 15 degrees, the EPDM will need to be laid with contact adhesive only.
What surfaces can EPDM rubber be bonded to?
Please note: Upstands and perimeter are always bonded with contact bonding adhesive or spray contact.
What kind of temperature can EPDM rubber be installed in?
Anything above 4 degrees will be OK.
My roof has a small hole which is causing a leak, how easy is it to repair this?
One of the benefits of EPDM is that it can be repaired very quickly and easily. A small hole or rip can be sealed with a patch repair kit.
Can EPDM rubber be painted?
Yes, but using acrylic based paint only.
ClassicBond Pro FAQs
What adhesive do I use when bonding Classicbond Pro EPDM?
For OSB3 / Plywood boards, then water based glue only. For any other substrate you can use PU deck adhesive.
Is Classicbond Pro Fire rated and BBA Certified?
Yes, ClassicBond Pro EPDM holds the BBA certificate, No. 11/4853 (issued to Flex-R Ltd). It also holds fire ratings Broof T4.
What are the benefits of Classicbond Pro over regular Classicbond?
Because it's a fleece reinforced membrane, this feature allows it to be bonded directly to a felt substrate, which you can't do with regular Classicbond EPDM rubber. It's Ideal for a repair, renewal or a new build.
What's is the life expectancy of Classicbond Pro?
It has a life expectancy of 50 years.
Does Classicbond Pro possess thermal properties?
The fleece is there to allow the membrane to be laid directly onto different substrates like felt, not for any thermal properties.
Does Classicbond Pro possess U Value?
The U Value of the Classicbond Pro is not something that is tested because it doesn't serve that purpose.
How do you join other parts of the Classicbond Pro where this no 3 inch tape applied?
You will need to use 6 inch tape to run along the whole ends where there isn't 3 inch tape pre-installed. You will also require 9 inch tape corner patches to seal any cross junctions / butt ends.
What you need to know
Delivery charges
Delivery access
Date and time of delivery
Failed deliveries are chargeable
Damages & missing items
Do not install purchased items if you have a query with the product (e.g. if you need to query damage that occurred during transit).
Delivery
How much does delivery cost?
Delivery charges will vary and will depend on the manufacturer, weight, size and delivery location. The cost is automatically calculated when you add items to the shopping basket.
How long will I wait for my delivery?
The estimated delivery times are shown on each product page, we will email you each step of the way to keep you informed. The majority of products can be delivered within 3-5 working days.We will advise you if the delivery period is different from than stated on our website.
Do you offer NEXT DAY delivery?
We currently offer next day delivery on certain brands. If you have a particular item that you require quicker than the guide on our website, please contact our sales team on 01858 455055 during office hours, they will be able to confirm whether a quicker delivery is possible.
What if my delivery doesn't turn up on time?
Please contact our sales office on 01858 455055 or email sales@roofgiant.com and we will advise on the status of your order.
Do you offer FREE Delivery if I spend a substantial amount?
Not as standard, we show the delivery charges separate once you go to the checkout so it is clear what you are paying for the products and delivery costs. If you are ordering larger quantities please contact out sales team who will be able to confirm if this is possible.
Do you deliver on Weekends?
Not as standard, our deliveries are made Monday to Friday. If you do need an urgent Saturday delivery please contact out sales team on 01858 455055 during office hours who will be able to confirm. This will incur a premium charge if possible.
Do you deliver to Northern Ireland/Guernsey/The Scottish Highlands/Isle of Wight?
Yes, we do but our transport charges incorporated in the site do not cover these areas, please contact our sales team on 01858 455055 during office hours for costs; or we will contact you to make the additional payment once you have completed your online purchase.
What if my delivery doesn't turn up on time?
Please contact our sales office on 01858 455055 or email sales@roofgiant.com and we will advise on the status of your order.
REFUND POLICY
Returns
Important Note: Please do not send goods back to Roof Giant before speaking to the Roof Giant sales office.
Roof Giant strongly recommend you take photographs of goods before returning. Occasionally goods are damaged during transit, therefore you may need to confirm the packaging/goods were intact (prior to collection) to the courier as part of the refund process.
As a consumer you have the right to change your mind (Consumer Regulations 2013). This right stipulates that for most products purchased online you have a legal right to change your mind within 14 days and receive a refund under the consumer contracts regulations 2013.
This right starts from the point you or someone you nominate receives the goods. If your goods are being delivered in multiple deliveries your right starts from the point the last delivery is received.
If you wish to exercise this right you must in the first instance contact us via phone 01858 455055 or email sales@roofgiant.com advising us of your wish to change your mind, its then your responsibility to arrange for the goods to be returned to us within 14 days of ending the contract.
For more information on our full returns policy, click here.
